Main wire drawing machinery manufacturing.

What are the contents of the safety operation procedures for continuous wire drawing machine workers?

Release time:

2023-08-18 14:05

Continuous wire drawing machine workers, in simple terms is the operation of continuous wire drawing machine operators, so called continuous wire drawing machine workers. So, for them, whether also need to comply with the safety procedures? Xiaobian think this is necessary. So below, we will expand the specific content in this regard, so that everyone can understand and understand.

The main contents of the safe operation procedures for continuous wire drawing machine workers are as follows:

(1) Operators should be trained and assessed, and must be certified. Before starting work, wear labor protection articles. When working, concentrate and can't do things that have nothing to do with work.

(2) If it is more than two people to operate, then should cooperate with each other, in the signal or gesture, can drive.

(3) It is strictly forbidden to stand or pass between the release frame and the coil bar entrance.

(4) Operators should operate in strict accordance with the requirements of the regulations, and illegal operations are strictly prohibited.

(5) When the raw material is rolled after the head, it cannot be rolled after the head.

(6) When the equipment is running, the protective cover on it should be closed to avoid danger.

(7) Before driving, the operator should carry out necessary inspections, and if there is any problem, it should be dealt with in time.

(8) Two people cannot use a grinding wheel at the same time. After the grinding wheel is used, the power supply should be cut off in time.

(9) The maintenance of the equipment by the operator shall be carried out when the equipment is powered off. And after the overhaul is completed, the test run shall be carried out.