Outside the principle of wire drawing machine, its operation requirements and maintenance can not be ignored


Wire drawing machine this product, today we will mainly introduce what content:

Aspect one: the operation requirements of the wire drawing machine.

Aspect 2: daily maintenance and weekly maintenance of wire drawing machine.

Since the above summary, then, we will expand its main content, so that we can further understand the wire drawing machine this product.

 

Operating requirements for 1. drawing machines

Before processing, the operator should carefully read the drawings and related technical data, and be familiar with and master them. When processing, it is necessary to correctly select and determine the drawing direction, drawing surface, etc., and operate in accordance with the specified requirements. Also protect the surface of the workpiece to avoid being scratched, so as not to cause waste.

2. The finished product should be handled with care and protected in layers to avoid damage to the finished product.

 

Daily and Weekly Maintenance of 2. Wire-drawing Machine

1. Daily maintenance

(1) The exterior and surroundings of the equipment shall be kept clean, tidy and sanitary.

(2) Check the air supply pipeline, joint and abrasive belt, whether the contact is good and whether it needs to be adjusted.

(3) Discharge the water in the air filter and lubricate the bearing seat.

2. Weekly maintenance

In addition to the daily maintenance content, there are:

(1) Whether the tension of the conveyor belt and abrasive belt is appropriate and whether it needs to be adjusted.

(2) Whether the operation of the wire drawing machine is correct and safe.