Operating procedures in wire drawing machines and wire drawing machines?

In front of the wire drawing machine, on the other hand, there is a lot of knowledge content, so, everyone on the one hand of the wire drawing machine, including its various types, should have a certain degree of knowledge and understanding, and accumulated a certain utility. However, the editor feels that, therefore, we cannot meet, but we should continue to learn on this basis, so that we can constantly update and expand our knowledge and will not fall behind.

Wire drawing machine, wire drawing machine, its operation content:

(1) All operators shall wear labor protection articles before taking up their posts, otherwise they cannot take up their posts to operate the equipment.

(2) Operators should operate the equipment in strict accordance with the requirements of the rules and regulations, in order to avoid improper operation and damage to the equipment.

(3) If two or more people come to operate, so people should cooperate well with each other and obey the unified command arrangement to avoid confusion.

(4) The steel plates and wires between the entrances can't stand it, and people who can't pass through.

(5) During the use of the wire drawing machine, if there is an abnormality, it should be stopped immediately, and then checked and dealt.

(6) The wire drawing machine of the grinding wheel, if the wear diameter is less than 1 \\ \/ 2, then it must be replaced.

(7) Mechanical equipment should be kept clean and tidy, and waste wires, waste parts, etc. that occur during the production process are placed in designated locations, not places.

(8) wire drawing machine maintenance, should be in its parking state, cut off the main circuit.

(9) After the maintenance of the wire drawing machine is completed, it must be tested, otherwise it cannot be used, and then due to maintenance personnel.

Today, Xiaobian will describe the knowledge content in the wire drawing machine, because the company's main products are various wire drawing machines, so for us, this is a good learning opportunity to learn more about the relevant content of the drawing machine, but also can increase the utility of our side, the wire drawing machine let us know more.

What is the wire drawing machine used for? In other words, what is its purpose?

Wire drawing machine, simply put, it is grain, the raw materials processed into continuous filament, called figure.

Drawing work, there are also some operational requirements and regulations, so what is the specific? The following small series of details, so that we understand the learning, understanding and mastery.

(1) Before painting, wear labor protection equipment to ensure their own safety, otherwise they cannot work.

(2) The equipment shall be operated by more than two people and cannot be operated alone. They shall cooperate with each other.

(3) The operation requirements of the designated wire drawing machine equipment should be strictly followed, and no illegal operation should be allowed to avoid damage to the equipment.

(4) Before starting the equipment, check the drum of the stamping line, and deal with it immediately if there is any.

(5) The mechanical equipment and surroundings should be kept clean and tidy without sundries. In the process of drawing, such as waste line should be placed in the specified position, not the place.

(6) There should be good communication between the operator and the maintenance personnel to ensure the normal use of the equipment.

There are wire drawing machines, types and wire drawing machine products including all websites, so for us, we must not only understand the species wire drawing machine, but also have an overall understanding and knowledge of the wire drawing machine, so as to understand more comprehensively and thoroughly, without losing any points. In doing so, we can also expand our knowledge of wire drawing machines, and not only pay attention to several of them, we benefit.

In the following, we first introduce a simple ring wire drawing machine, and then compare the wire drawing machine and the wire rolling machine, so that these two kinds of machinery and equipment can be distinguished.

Ring wire drawing machine, from a professional point of view, it is a non-slip wire drawing machine. During the painting process, the axial torsion will not cause this problem. Even better, it uses a DC motor to achieve a wider range of stepless speed regulation, thereby expanding the range of choices between drum elongation., In the most reasonable can let the wire drawing machine work under the state of operation. Its application is mainly used for wire drawing of medium and small gauge high strength steel and alloy steel.

This kind of wire drawing machine also has defects, mainly because the electrical control is more complicated, the maintenance is more difficult, and the manufacturing cost is higher, so it is not suitable for large-size steel wire drawing and hard materials.

Wire drawing machine, thread rolling machine, these two are completely different machines, because the corresponding process is completely different, so it cannot be equated.