The concept of wire drawing machine

Wire drawing machine is also called wire drawing machine and wire drawing machine. Its English name is drawing machine. It is a mechanical equipment widely used in industrial applications. It is widely used in machinery manufacturing, hardware processing, petrochemical industry, plastics, bamboo and wood products, wire and cable and other industries. Wire drawing machines can be divided into metal wire drawing machines (used for pre-processing the production of metal products such as standard parts), plastic wire drawing machines (used in the plastic products industry to produce various hollow, solid yarn or flat yarn for deep processing with polyester, nylon, polyethylene, polypropylene, polyester chips, etc. as raw materials), bamboo wire drawing machines (used in the bamboo products industry to make chopsticks, toothpicks, special equipment for reprocessing bamboo and wood shreds such as barbecue sticks).

metal wire drawing machine

It belongs to the pre-processing equipment for the production of standard parts and other metal products. The purpose is to make the wire or bar produced and transported by the steel manufacturer to the standard parts and other metal products manufacturer through the drawing treatment of the drawing machine, so that the diameter, roundness, internal metallographic structure, surface finish and straightness of the wire or bar meet the raw material processing requirements for the production of standard parts and other metal products. Therefore, the pretreatment quality of wire or bar by wire drawing machine is directly related to the product quality of metal products manufacturers such as standard parts. Wire drawing machine is widely used in the production and pre-processing of steel wire, rope wire, prestressed steel wire, standard parts and other metal products.

plastic wire drawing machine

The products are all non-drying and exhaust energy-saving plastic wire drawing machines. The main feature is that the barrel is provided with an exhaust port, and the barrel is connected with at least two or more sections. The pitch of the screw in the first section of the barrel is different from that of the latter. It does not need a plastic mixer to stir, and can suck out the moisture generated by the plastic in the stirring. The drawn plastic wire has uniform thickness and smoothness, is not easy to break, and has high work efficiency and low energy consumption.

Water tank wire drawing machine

The water tank wire drawing machine (also known as the sliding multiple wire drawing machine) has the characteristics of reverse tension drawing. Its structure is simple, compact, small footprint, convenient operation, high drawing speed, good cooling conditions, long mold service life, environmental protection and no dust, The surface of the finished steel wire is clean and has no torsion. However, when drawing the steel wire, there is always relative sliding between the steel wire and the tower wheel, resulting in adhesive wear and abrasive wear, which leads to frequent scrap (repair) of the tower wheel, abrasion of the surface of the steel wire and the lubricating layer, and in severe cases, the phenomenon of pulling white and cracking, making production impossible. In order to overcome the friction generated by the sliding of the steel wire on the tower wheel, it consumes a lot of power, often reaching 30%-40% of the total power of the wire drawing machine, which seriously restricts the use of the water tank wire drawing machine in the wire products industry.